View DF005S1_1114362.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPICE MODELS: DF005S DF01S DF02S DF04S DF06S DF08S DF10S
DF005S - DF10S
1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features
* * * * * *
Glass Passivated Die Construction Low Forward Voltage Drop, High Current Capability Surge Overload Rating to 50A Peak Designed for Surface Mount Application UL Listed Under Recognized Component Index, File Number E94661 Lead Free Finish, RoHS Compliant (Date Code 0532+) (Note 3) Dim DF-S Min 7.40 6.20 0.22 0.076 -- 1.02 8.13 2.40 5.00 1.00 Max 7.90 6.50 0.30 0.33 10.40 1.53 8.51 2.60 5.20 1.20 A B C D E G
L
G
AB
DE
Mechanical Data
* * * * * * *
Case: DF-S Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish - Tin. Solderable per MIL-STD-202, Method 208 e3 Polarity: As marked on Case Marking: Type Number, See Page 3 Weight: 0.38 grams (approximate)
H J K
C
H J K L
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Forward Rectified Current @ TA = 40C Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load Forward Voltage (per element) Peak Reverse Current at Rated DC Blocking Voltage (per element) I2t Rating for Fusing (t<8.3ms) Typical Total Capacitance (per element) (Note 1) Typical Thermal Resistance, Junction to Ambient (Note 2) Operating and Storage Temperature Range
Notes:
@ TA = 25C unless otherwise specified
Symbol VRMM VRWM VR VRMS IO IFSM VFM IRM I2 t CT RqJA Tj, TSTG
DF 005S 50 35
DF 01S 100 70
DF 02S 200 140
DF 04S 400 280 1.0 50 1.1 10 500 10.4 25 40 -65 to +150
DF 06S 600 420
DF 08S 800 560
DF 10S 1000 700
Unit V V A A V A A2 s pF C/W C
@ IF = 1.0A @ TA = 25C @ TA = 125C
1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0V DC. 2. Thermal resistance, junction to ambient, measured on PC board with 5.0mm2 (0.03mm thick) land areas. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
DS17001 Rev. 13 - 2
1 of 3 www.diodes.com
DF005S-DF10S
a Diodes Incorporated
60 Hz Resistive or Inductive load
IF, INSTANTANEOUS FORWARD CURRENT (A)
1.0
10
I(AV), AVERAGE FORWARD CURRENT (A)
1.0
0.5
0.1
0 40 60 80 100 120 140
0.01 0.4 0.6 0.8 1.0 1.2 1.4
TA, AMBIENT TEMPERATURE (C) Fig. 1 Output Current Derating Curve
VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typ Forward Characteristics (per element)
IFSM, PEAK FORWARD SURGE CURRENT (A)
60
Single half-sine-Wave
100
Tj = 25C f = 1.0 Mhz Vsig = 50 mV p-p
50
40
30
CT, TOTAL CAPACITANCE (pF)
1 10 100
10
20
10 0
1 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance (per element)
NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current
100
Tj = 125C
10
1.0
0.1
Tj = 25C
0.01 0 20 40 60 80 100 120 140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typ Reverse Characteristics (per element)
DS17001 Rev. 13 - 2
2 of 3 www.diodes.com
DF005S-DF10S
Ordering Information
Device* DFxS DFxS-T
(Note 4) Packaging DF-S DF-S Shipping 50 Per Tube 1500/Tape & Reel, 13-inch
* x = Device type, e.g. DF005S or DF10S, etc. Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
DFxxxS XXXX
= Manufacturers' code marking DFxxxS = Product type marking code, ex: DF10S YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52
IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.
DS17001 Rev. 13 - 2
3 of 3 www.diodes.com
DF005S-DF10S

▲Up To Search▲

Price & Availability of DF005S1

	To Download DF005S1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .